Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1073
show ipv6 pim rp-hash, show ipv6 pim rp mapping
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1073 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show ipv6 pim rp-hash This command displays which rendezvous point (RP) is being used for a specified group that you must specify with the group-address argument. Format Modes show ipv6 pim rp-hash group-address Privileged EXEC User EXEC Term RP Address Type Definition The IPv6 address of the RP for the group specified. Indicates the mechanism (BSR or static) by which the RP was selected. Command example: (NETGEAR) #show ipv6 pim rp-hash 224.1.2.0 RP Address192.168.10.1 Type Static Command example: If no RP Group mapping exists on the router, the following message is displayed: No RP-Group mappings exist/learned on this router. show ipv6 pim rp mapping Use this command to display the mapping for the PIM group to the active Rendezvous points (RP) of which the router is a aware (either configured or learned from the bootstrap router [BSR]). Use the optional parameters to limit the display to a specific RP address (rp-address) or to view group-to-candidate RP (candidate) or group to Static RP mapping information (static). Format Modes show ipv6 pim rp mapping [rp-address | candidate | static] Privileged EXEC User EXEC Term RP Address Group Address Definition The IPv6 address of the RP for the group specified. The IPv6 address and prefix length of the multicast group. IPv6 Multicast Commands 1073 CLI Command Reference Manual