Netgear XSM4324FS CLI Manual Software Version 12.x - Page 395
spanning-tree vlan cost
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches spanning-tree vlan cost Use this command to set the path cost for a port in a VLAN. The valid path cost values are in the range of 1 to 200000000 or auto. If auto is selected, the path cost value is set based on the link speed. Default Format Mode None spanning-tree vlan vlan-id cost {auto | value} Interface Config spanning-tree vlan forward-time Use this command to configure the spanning tree forward delay time for a VLAN or a set of VLANs. The default is 15 seconds. Set this value to a lower number to accelerate the transition to forwarding. Take into account the end-to-end BPDU propagation delay, the maximum frame lifetime, the maximum transmission halt delay, and the message age overestimate values specific to their network when configuring this parameter. Default Format Mode 15 seconds spanning-tree vlan vlan-list forward-time seconds Global Config Parameter vlan-list forward-time Description The VLANs to which to apply this command. The spanning tree forward delay time. The range is 4-30 seconds. spanning-tree vlan hello-time Use this command to configure the spanning tree hello time for a specified VLAN or a range of VLANs. The default is 2 seconds. Set this value to a lower number to accelerate the discovery of topology changes. Default Format Mode 2 seconds spanning-tree vlan vlan-list hello-time seconds Global Config Parameter vlan-list hello-time Description The VLANs to which to apply this command. The spanning tree forward hello time. The range is 1-10 seconds. Switching Commands 395 CLI Command Reference Manual