Netgear XSM4324FS CLI Manual Software Version 12.x - Page 871

M4300 Intelligent Edge Series Fully Managed Stackable Switches redistribute (OSPFv3) This command configures the OSPFv3 protocol to allow redistribution of routes from the specified source protocol/routers. The metric argument can be a number in the range 0-16777214. The metric type can be 1 or 2. The tag argument can be a number in the range 0-4294967295. Default Format Mode metric-unspecified type-2 tag-0 redistribute {static | connected} [metric metric] [metric-type {1 | 2}] [tag taq] Router OSPFv3 Config no redistribute This command configures OSPF protocol to prohibit redistribution of routes from the specified source protocol/routers. Format Mode no redistribute {static | connected} [metric] [metric-type] [tag] Router OSPFv3 Config router-id (OSPFv3) This command sets a 4-digit dotted-decimal number uniquely identifying the router ospf id. The ipaddress is a configured value. Format Mode router-id ipaddress Router OSPFv3 Config timers pacing lsa-group (OSPFv3) Use this command to adjust how OSPFv3 groups LSAs for periodic refresh. OSPFv3 refreshes self-originated LSAs approximately once every 30 minutes. When OSPFv3 refreshes LSAs, it considers all self-originated LSAs whose age is from 1800 to 1800 plus the pacing group size. Grouping LSAs for refresh allows OSPFv3 to combine refreshed LSAs into a minimal number of LS Update packets. Minimizing the number of Update packets makes LSA distribution more efficient. When OSPFv3 originates a new or changed LSA, it selects a random refresh delay for the LSA. When the refresh delay expires, OSPFv3 refreshes the LSA. By selecting a random refresh delay, OSPFv3 avoids refreshing a large number of LSAs at one time, even if a large number of LSAs are originated at one time. IPv6 Commands 871 CLI Command Reference Manual