Netgear XSM4324FS CLI Manual Software Version 12.x - Page 175
source and dest port, ICMP type, and code; SRC-IPv6, DST_IPv6, IPv6 Flow Label, ECN
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show openflow table-status openflow10 Flow Table 1 Flow Table Name Forwarding Database Maximum Size 64 Number of Entries 8 Hardware Entries 7 Software-Only Entries 1 Waiting for Space Entries 0 Flow Insertion Count 1 Flow Deletion Count 0 Insertion Failure Count 0 Flow Table Description: The forwarding database maps non-multicast MAC addresses and the ports on which these addresses are located. Example: The following shows example CLI display output for the command. (NETGEAR Switch) #show openflow table-status openflow13 Flow Table 60 Flow Table Name Openflow 1.3 Maximum Size 1920 Number of Entries 0 Hardware Entries 0 Software-Only Entries 0 Waiting for Space Entries 0 Flow Insertion Count 0 Flow Deletion Count 0 Insertion Failure Count 0 Flow Table Description The Openflow 1.3 table matches on the packet layer-2 header, including DA-MAC, SA-MAC, VLAN, Vlan priority ether type; layer-3 header, including SRC-IP, DST-IP, IP protocol, IP-TOS; layer-4 header, including UDP/TCP source and dest port, ICMP type, and code; SRC-IPv6, DST_IPv6, IPv6 Flow Label,ECN, ICMPv6 type and code, source L4 Port for TCP / UDP / SCTP and input port including physical port and LAG port. Management Commands 175 CLI Command Reference Manual