Netgear XSM4324FS CLI Manual Software Version 12.x - Page 182

M4300 Intelligent Edge Series Fully Managed Stackable Switches erase application Use this command to erase an executable application file that is stored in nonvolatile memory on the switch. Format Mode erase application filename Global Config show application This command displays the applications that are installed on the switch and execution configurations of the applications. Format Mode show application Privileged EXEC Field filename start-on-boot auto-restart max-CPU-Util max-Memory Description The name of the application. Indicates whether the application is configured to start when the switch boots: • Yes. The application starts when the switch boots. • No. The application does not start when the switch boots. Indicates whether the application is configured to restart when the application process stops: • Yes. The application restarts when the application process stops. • No. The application does not restart when the application process stops. The command application CPU utilization limit expressed as a percentage. If the utilization is not limited, None is displayed. The application memory usage limit in megabytes. If the memory usage is not limited, None is displayed. show application files This command displays the files in the application directory of the switch file system. Format Mode show application files Privileged EXEC Field filename file size directory size Description The name of the application. The number of bytes that the file uses in the file system. The number of bytes that all files in the application directory use. Management Commands 182 CLI Command Reference Manual