Netgear XSM4324FS CLI Manual Software Version 12.x - Page 380
link-flap d-disable, link-flap d-disable duration
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 380 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches link-flap d-disable This command enables the link-flap feature on the switch. When enabled, the switch counts the number of link flaps on a port during a configured period. If the number of link flaps on a port exceeds a configured threshold, the port is placed in the D-Disable state. Default Format Mode enabled link-flap d-disable Global Config no link-flap d-disable This command disables the link-flap feature on the switch. Format Mode no link-flap d-disable Global Config link-flap d-disable duration This command configures the maximum period that a port is allowed to flap before the port is placed in the D-Disable state. The duration argument can be from 3 to 200 seconds. The default is 10 seconds. Default Format Mode 10 seconds link-flap d-disable duration duration Global Config no link-flap d-disable duration This command sets the link-flap duration to its defaults of 10 seconds. Format Mode no link-flap d-disable duration Global Config link-flap d-disable max-count This command configures the maximum number of flaps that are allowed before the port is placed in the D-Disable state. The count argument can be a number from 2 to 100. The default number is 5. Default Format Mode 5 link-flap d-disable max-count count Global Config Switching Commands 380 CLI Command Reference Manual