Netgear XSM4324FS CLI Manual Software Version 12.x - Page 130
snmp-server enable traps linkmode, snmp tr, ap link, tus
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no snmp-server enable traps This command disables the Authentication Flag. Format Mode no snmp-server enable traps Global Config snmp-server enable traps linkmode This command enables Link Up/Down traps for the entire switch. If enabled, the switch sends link traps only if the Link Trap flag setting that is associated with a port is enabled. For more information, see snmp trap link-status on page 134 Default Format Mode enabled snmp-server enable traps linkmode Global Config no snmp-server enable traps linkmode This command disables Link Up/Down traps for the entire switch. Format Mode no snmp-server enable traps linkmode Global Config snmp-server enable traps multiusers This command enables multiple user traps. If the traps are enabled, the switch sends a multiple user trap if a user logs in to the terminal interface (EIA 232 or Telnet) while an existing terminal interface session is already established. Default Format Mode enabled snmp-server enable traps multiusers Global Config no snmp-server enable traps multiusers This command disables multiple user traps. Format Mode no snmp-server enable traps multiusers Global Config Management Commands 130 CLI Command Reference Manual