Netgear XSM4324FS CLI Manual Software Version 12.x - Page 252
sntp client port, sntp unicast client poll-interval
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no sntp client mode This command disables Simple Network Time Protocol (SNTP) client mode. Format Mode no sntp client mode Global Config sntp client port This command sets the SNTP client port ID to a value in the range 1025-65535, represented by the portid argument. The default value is 0, which means that the SNTP port is not configured by the user. In the default case, the actual client port value used in SNTP packets is assigned by the underlying OS. Default Format Mode 0 sntp client port portid Global Config no sntp client port This command resets the SNTP client port back to its default value. Format Mode no sntp client port Global Config sntp unicast client poll-interval This command sets the poll interval for SNTP unicast clients in seconds as a power of two where poll-interval can be a value from 6 to 10. Default Format Mode 6 sntp unicast client poll-interval poll-interval Global Config no sntp unicast client poll-interval This command resets the poll interval for SNTP unicast clients to its default value. Format Mode no sntp unicast client poll-interval Global Config Utility Commands 252 CLI Command Reference Manual