Netgear XSM4324FS CLI Manual Software Version 12.x - Page 223
Logging Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Logging Commands This section describes the commands you use to configure system logging, and to view logs and the logging settings. logging buffered This command enables logging to an in-memory log. You can specify the severity level value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Default Format Mode disabled; notice (5) when enabled logging buffered [severitylevel] Global Config no logging buffered This command disables logging to in-memory log. Format Mode no logging buffered Global Config logging buffered wrap This command enables wrapping of in-memory logging when the log file reaches full capacity. Otherwise when the log file reaches full capacity, logging stops. Default Format Mode enabled logging buffered wrap Privileged EXEC no logging buffered wrap This command disables wrapping of in-memory logging and configures logging to stop when the log file capacity is full. Format Mode no logging buffered wrap Privileged EXEC Utility Commands 223 CLI Command Reference Manual