Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1078
ipv6 mld startup-query-interval
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1078 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches ipv6 mld startup-query-interval Use this command to set the interval between general IPv6 MLD queries that are sent when the MLP process starts on the interface or range of interfaces. The range for the seconds argument is 1 to 300 seconds. The default is 31 seconds. Default Format Mode 31 ipv6 mld startup-query-interval seconds Interface Config no ipv6 mld startup-query-interval Use this command to reset the startup query interval for IPv6 MLD to the default value of 31 seconds. Format Mode no ipv6 mld startup-query-interval Interface Config ipv6 mld startup-query-count Use this command to specify the number of IPv6 MLD queries that are sent when the MLP process starts on the interface or range of interfaces and that is separated by the startup query interval on the interface or range of interfaces. The range for the number argument is 1 to 20. The default is 2. Default Format Mode 2 ipv6 mld startup-query-count number Interface Config no ipv6 mld startup-query-count Use this command to reset the startup query count for IPv6 MLD to the default value of 2. Format Mode no ipv6 mld startup-query-count Interface Config ipv6 mld last-member-query-interval Use this command to set the last member query interval for an MLD interface or range of interfaces, which is the value of the maximum response time parameter in the group specific queries sent out of this interface. The range for the milliseconds argument is from 0 to 65535 milliseconds. IPv6 Multicast Commands 1078 CLI Command Reference Manual