Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1047
show ip igmp interface
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1047 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches If you do not use the detail keyword, the following fields display. Term IP Address Subnet Mask Interface Mode Definition The IP address of the interface participating in the multicast group. The subnet mask of the interface participating in the multicast group. This displays whether IGMP is enabled or disabled on this interface. The following fields are not displayed if the interface is not enabled. Term Querier Status Groups Definition This displays whether the interface has IGMP in Querier mode or Non-Querier mode. The list of multicast groups that are registered on this interface. If you use the detail keyword, the following fields display. Term Definition Multicast IP Address The IP address of the registered multicast group on this interface. Last Reporter The IP address of the source of the last membership report received for the specified multicast group address on this interface. Up Time The time elapsed since the entry was created for the specified multicast group address on this interface. Expiry Time The amount of time remaining to remove this entry before it is aged out. Version1 Host Timer The time remaining until the local router assumes that there are no longer any IGMP version 1 multicast members on the IP subnet attached to this interface. This could be an integer value or "-----" if there is no Version 1 host present. Version2 Host Timer The time remaining until the local router assumes that there are no longer any IGMP version 2 multicast members on the IP subnet attached to this interface. This could be an integer value or "-----" if there is no Version 2 host present. Group The group compatibility mode (v1, v2 or v3) for this group on the specified interface. Compatibility Mode show ip igmp interface This command displays the IGMP information for the interface. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. IP Multicast Commands 1047 CLI Command Reference Manual