Netgear XSM4324FS CLI Manual Software Version 12.x - Page 921
show ipv6 verify, show ipv6 verify source
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 921 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show ipv6 verify Use this command to display the IPv6 configuration on a specified interface in the unit/slot/port format. Format Mode show ipv6 verify unit/slot/port Privileged EXEC User EXEC Term Interface Filter Type IPv6 Address MAC Address VLAN Definition Interface address in unit/slot/port format. Is one of two values: • ip-v6mac: User has configured MAC address filtering on this interface. • ipv6: Only IPv6 address filtering on this interface. IPv6 address of the interface If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port security is disabled on the interface, then the MAC Address field displays "permit-all." The VLAN for the binding rule. Command example: (NETGEAR Switch) #show ipv6 verify 0/1 Interface --------- 0/1 0/1 Filter Type ----------- ipv6-mac ipv6-mac IP Address 2000::1/64 3000::1/64 MAC Address 00:02:B3:06:60:80 00:0F:FE:00:13:04 Vlan ----- 10 10 show ipv6 verify source Use this command to display the IPv6SG configurations on all ports. If the interface option is specified, the output is restricted to the specified unit/slot/port argument. Format Mode show ipv6 verify source [interface unit/slot/port] Privileged EXEC User EXEC Term Interface Filter Type Definition Interface address in unit/slot/port format. Is one of two values: • ip-v6mac: User has configured MAC address filtering on this interface. • ipv6: Only IPv6 address filtering on this interface. IPv6 Commands 921 CLI Command Reference Manual