Netgear XSM4324FS CLI Manual Software Version 12.x - Page 421
vlan port ingressfilter all, vlan port pvid all, no vlan port acceptframe all
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 421 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no vlan port acceptframe all This command sets the frame acceptance mode to the default mode all. Format Mode no vlan port acceptframe all Global Config vlan port ingressfilter all This command enables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN. Default Format Mode Disabled vlan port ingressfilter all Global Config no vlan port ingressfilter all This command disables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN. Format Mode no vlan port ingressfilter all Global Config vlan port pvid all This command changes the VLAN ID for all interfaces. The number is a valid VLAN identification number in the range 1-4093. Default Format Mode 1 vlan port pvid all number Global Config no vlan port pvid all This command sets the VLAN ID for all interfaces to 1. Format Mode no vlan port pvid all Global Config Switching Commands 421 CLI Command Reference Manual