Netgear XSM4324FS CLI Manual Software Version 12.x - Page 636

M4300 Intelligent Edge Series Fully Managed Stackable Switches show isdp neighbors This command displays the list of neighboring devices. Format Mode show isdp neighbors [unit/slot/port | detail] Privileged EXEC Term Device ID IP Addresses Capability Platform Interface Port ID Hold Time Advertisement Version Entry Last Changed Time Version Definition The device ID associated with the neighbor which advertised the information. The IP addresses associated with the neighbor. ISDP functional capabilities advertised by the neighbor. The hardware platform advertised by the neighbor. The interface (unit/slot/port) on which the neighbor's advertisement was received. The port ID of the interface from which the neighbor sent the advertisement. The hold time advertised by the neighbor. The version of the advertisement packet received from the neighbor. Time when the entry was last modified. The software version that the neighbor is running. Command example: (NETGEAR Switch) #show isdp neighbors Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge, S - Switch, H - Host, I - IGMP, r - Repeater Device ID Switch Intf Holdtime Capability Platform 0/1 165 RI cisco WS-C4948 Port ID GigabitEthernet1/1 Command example: (NETGEAR Switch) #show isdp neighbors detail Device ID Address(es): IP Address: Capability Platform Interface Port ID 0001f45f1bc0 10.27.7.57 Router Trans Bridge Switch IGMP SecureChassis C2 0/48 ge.3.14 Switching Commands 636 CLI Command Reference Manual