Netgear XSM4324FS CLI Manual Software Version 12.x - Page 76

M4300 Intelligent Edge Series Fully Managed Stackable Switches Note: When you change the time-out value, the new value is applied to all active and inactive sessions immediately. Any sessions that have been idle longer than the new time-out value are disconnected immediately. Default Format Mode 5 telnetcon timeout minutes Privileged EXEC no telnetcon timeout This command sets the Telnet connection session timeout value to the default. Note: Changing the time-out value for active sessions does not become effective until the session is accessed again. Also, any keystroke activates the new time-out duration. Format Mode no telnetcon timeout Privileged EXEC show telnet This command displays the current outbound Telnet settings. In other words, these settings apply to Telnet connections initiated from the switch to a remote system. Format Modes show telnet • Privileged EXEC • User EXEC Term Definition Outbound Telnet Login Timeout The number of minutes an outbound Telnet session is allowed to remain inactive before being logged off. Maximum Number The number of simultaneous outbound Telnet connections allowed. of Outbound Telnet Sessions Allow New Outbound Telnet Sessions Indicates whether outbound Telnet sessions will be allowed. Management Commands 76 CLI Command Reference Manual