Netgear XSM4324FS CLI Manual Software Version 12.x - Page 956

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following information is repeated for each class instance within this policy: Term Class Name In Discarded Packets Definition The name of this class instance. A count of the packets discarded for this class instance for any reason due to DiffServ treatment of the traffic class. show service-policy This command displays a summary of policy-oriented statistics information for all interfaces in the specified direction. Format Mode show service-policy {in | out} Privileged EXEC The following information is repeated for each interface and direction (only those interfaces configured with an attached policy are shown): Term Definition Interface unit/slot/port Operational Status The current operational status of this DiffServ service interface. Policy Name The name of the policy attached to the interface. MAC Access Control List Commands This section describes the commands you use to configure MAC Access Control List (ACL) settings. MAC ACLs ensure that only authorized users have access to specific resources and block any unwarranted attempts to reach network resources. The following rules apply to MAC ACLs: • The maximum number of ACLs you can create is hardware dependent. The limit applies to all ACLs, regardless of type. • The system supports only Ethernet II frame types. • The maximum number of rules per MAC ACL is hardware dependent. mac access-list extended This command creates a MAC Access Control List (ACL) identified by name, consisting of classification fields defined for the Layer 2 header of an Ethernet frame. The name parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the MAC access list. The rate-limit attribute configures the committed rate and the committed burst size. Quality of Service Commands 956 CLI Command Reference Manual