Netgear XSM4324FS CLI Manual Software Version 12.x - Page 695

M4300 Intelligent Edge Series Fully Managed Stackable Switches ip irdp preference This command configures the preferability of the address as a default router address, relative to other router addresses on the same subnet. The preference number can be a number from -2147483648 to 2147483647. Default Format Mode 0 ip irdp preference number Interface Config no ip irdp preference This command configures the default preferability of the address as a default router address, relative to other router addresses on the same subnet. Format Mode no ip irdp preference Interface Config show ip irdp This command displays the router discovery information for all interfaces, a specified interface, or specified VLAN. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id argument are used to specify the VLAN ID of the routing VLAN directly instead of in a unit/slot/port format. The vland-id argument can be a number from 1-4093. Format Modes show ip irdp {unit/slot/port | vlan vland-id | all} Privileged EXEC User EXEC Term Interface vlan Ad Mode Dest Address Max Int Min Int Definition The unit/slot/port that corresponds to a physical routing interface or VLAN routing interface. Use this keyword to specify the VLAN ID of the routing VLAN directly instead of in a unit/slot/port format. The advertise mode, which indicates whether router discovery is enabled or disabled on this interface. The destination IP address for router advertisements. The maximum advertise interval, which is the maximum time, in seconds, allowed between sending router advertisements from the interface. The minimum advertise interval, which is the minimum time, in seconds, allowed between sending router advertisements from the interface. Routing Commands 695 CLI Command Reference Manual