Netgear XSM4324FS CLI Manual Software Version 12.x - Page 603
lldp transmit-mgmt, lldp notification, sys-desc, sys-cap, port-desc
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 603 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches To configure the system name, see snmp-server on page 126. Use sys-desc to transmit the system description TLV. Use sys-cap to transmit the system capabilities TLV. Use port-desc to transmit the port description TLV. To configure the port description, see description (Interface Config) on page 369 Default Format Mode no optional TLVs are included lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc] Interface Config no lldp transmit-tlv Use this command to remove an optional TLV from the LLDPDUs. Use the command without parameters to remove all optional TLVs from the LLDPDU. Format Mode no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc] Interface Config lldp transmit-mgmt Use this command to include transmission of the local system management address information in the LLDPDUs. This command can be used to configure a single interface or a range of interfaces. Format Mode lldp transmit-mgmt Interface Config no lldp transmit-mgmt Use this command to include transmission of the local system management address information in the LLDPDUs. Use this command to cancel inclusion of the management information in LLDPDUs. Format Mode no lldp transmit-mgmt Interface Config lldp notification Use this command to enable remote data change notifications on an interface or a range of interfaces. Default Format Mode disabled lldp notification Interface Config Switching Commands 603 CLI Command Reference Manual