Netgear XSM4324FS CLI Manual Software Version 12.x - Page 168
openflow variant, clear openflow ca-certs, show openflow, no openflow passive-mode
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no openflow passive-mode This command disables OpenFlow passive mode. Format Mode no openflow passive-mode Global Config openflow variant This command configures OpenFlow mode 1.0 or mode 1.3. (For OpenFlow, mode is also referred to as variant.) By default, OpenFlow is configured for mode 1.3. Default Format Mode openflow1.3 openflow variant {openflow10 | openflow13} Global Config clear openflow ca-certs This command erases the certificate authority (CA) certificates that the switch uses to validate the OpenFlow controllers. When you enter this command, OpenFlow is automatically disabled and reenabled. The first time that the switch connects to the OpenFlow controller, the SSL certificates are reloaded from the OpenFlow controller. You can also manually load the SSL certificates by using a copy command. Format Mode clear openflow controller-certs Privileged Exec show openflow This command displays the status and configuration information of OpenFlow. Format Mode show openflow Privileged Exec Term Definition Administrative Mode The OpenFlow administrative mode that is specified by the openflow enable command. Administrative Status The operational status of OpenFlow. Although OpenFlow can be administratively enabled, it could be operationally disabled. Disable Reason If OpenFlow is operationally disabled, the reason why OpenFlow is disabled. IP Address The IPv4 address that is assigned to OpenFlow. If no IP address is assigned, the status is None. Management Commands 168 CLI Command Reference Manual