Netgear XSM4324FS CLI Manual Software Version 12.x - Page 867

M4300 Intelligent Edge Series Fully Managed Stackable Switches default-metric (OSPFv3) This command is used to set a default for the metric of distributed routes. The metric argument can be a number in the range 0-16777214. Format Mode default-metric metric Router OSPFv3 Config no default-metric (OSPFv3) This command is used to set a default for the metric of distributed routes. Format Mode no default-metric Router OSPFv3 Config distance ospf (OSPFv3) This command sets the route preference value of OSPF route types in the router. Lower route preference values are preferred when determining the best route. The type of OSPF route can be intra, inter, or external. All the external type routes are given the same preference value. The range for the preference value is from 1 to 255. Default Format Mode 110 distance ospf {intra-area preference | inter-area preference | external preference} Router OSPFv3 Config no distance ospf This command sets the default route preference value of OSPF routes in the router. The type of OSPF route can be intra, inter, or external. All the external type routes are given the same preference value. Format Mode no distance ospf {intra-area | inter-area | external} Router OSPFv3 Config enable (OSPFv3) This command resets the default administrative mode of OSPF in the router (active). Default Format Mode enabled enable Router OSPFv3 Config IPv6 Commands 867 CLI Command Reference Manual