Netgear XSM4324FS CLI Manual Software Version 12.x - Page 542
show ip dhcp snooping binding, static, dynamic, interface
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 542 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show ip dhcp snooping DHCP snooping is Disabled DHCP snooping source MAC verification is enabled DHCP snooping is enabled on the following VLANs: 11 - 30, 40 Interface --------0/1 0/2 0/3 0/4 0/6 Trusted -------- Yes No No No No Log Invalid Pkts No Yes Yes No No show ip dhcp snooping binding Use this command to display the DHCP Snooping binding entries. To restrict the output, use the following options: • static. Restrict the output based on static entries. • dynamic. Restrict the output based on DCHP snooping. • interface unit/slot/port. Restrict the output based on a specific interface. • vlan-id. Restrict the output based on a VLAN. Format Mode show ip dhcp snooping binding [static | dynamic] [interface unit/slot/port] [vlan-id] Privileged EXEC User EXEC Term MAC Address IP Address VLAN Interface Type Lease (sec) Definition Displays the MAC address for the binding that was added. The MAC address is the key to the binding database. Displays the valid IP address for the binding rule. The VLAN for the binding rule. The interface to add a binding into the DHCP snooping interface. Binding type; statically configured from the CLI or dynamically learned. The remaining lease time for the entry. Switching Commands 542 CLI Command Reference Manual