Netgear XSM4324FS CLI Manual Software Version 12.x - Page 839
If an IPv6 prefix is con d on the interface, the following information also displays.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 839 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Address Autoconfigure Mode Shows whether the autoconfigure mode is enabled or disabled. Address DHCP Mode Shows whether the DHCPv6 client is enabled on the interface. IPv6 Hop Limit Unspecified Indicates if the router is configured on this interface to send Router Advertisements with unspecified (0) as the Current Hop Limit value. Router Advertisement NS Interval The interval, in milliseconds, between router advertisements for advertised neighbor solicitations. Router Advertisement Lifetime Shows the router lifetime value of the interface in router advertisements. Router Advertisement Reachable Time The amount of time, in milliseconds, to consider a neighbor reachable after neighbor discovery confirmation. Router Advertisement Interval The frequency, in seconds, that router advertisements are sent. Router Advertisement Managed Config Flag Shows whether the managed configuration flag is set (enabled) for router advertisements on this interface. Router Advertisement Other Config Shows whether the other configuration flag is set (enabled) for router Flag advertisements on this interface. Router Advertisement Router Preference Shows the router preference. Router Advertisement Suppress Flag Shows whether router advertisements are suppressed (enabled) or sent (disabled). IPv6 Destination Unreachables Shows whether ICMPv6 Destination Unreachable messages may be sent (enabled) or not (disabled). For more information, see ipv6 unreachables on page 835. ICMPv6 Redirect Specifies if ICMPv6 redirect messages are sent back to the sender by the Router in the redirect scenario is enabled on this interface. If an IPv6 prefix is configured on the interface, the following information also displays. Term Definition IPv6 Prefix is The IPv6 prefix for the specified interface. Preferred Lifetime The amount of time the advertised prefix is a preferred prefix. Valid Lifetime The amount of time the advertised prefix is valid. Onlink Flag Shows whether the onlink flag is set (enabled) in the prefix. Autonomous Flag Shows whether the autonomous address-configuration flag (autoconfig) is set (enabled) in the prefix. IPv6 Commands 839 CLI Command Reference Manual