Netgear XSM4324FS CLI Manual Software Version 12.x - Page 889

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Translator Stability The amount of time that an elected translator continues to perform its duties after it determines that Interval its translator status has been deposed by another router. Translator State Shows whether the ABR translator state is disabled, always, or elected. show ipv6 ospf asbr This command displays the internal OSPFv3 routes to reach Autonomous System Boundary Routers (ASBR). This command takes no options. Format Modes show ipv6 ospf asbr Privileged EXEC User EXEC Term Type Router ID Cost Area ID Next Hop Next Hop Intf Definition The type of the route to the destination. It can be either: • intra. Intra-area route • inter. Inter-area route Router ID of the destination. Cost of using this route. The area ID of the area from which this route is learned. Next hop toward the destination. The outgoing router interface to use when forwarding traffic to the next hop. show ipv6 ospf database This command displays information about the link state database when OSPFv3 is enabled. If you do not enter any parameters, the command displays the LSA headers for all areas. Use the optional area-id parameter to display database information about a specific area. Use the other optional parameters to specify the type of link state advertisements to display: • Use external to display the external LSAs. • Use inter-area to display the inter-area LSAs. • Use link to display the link LSAs. • Use network to display the network LSAs. • Use nssa-external to display NSSA external LSAs. • Use prefix to display intra-area Prefix LSAs. • Use router to display router LSAs. • Use unknown area, unknown as, or link to display unknown area, AS or link-scope LSAs, respectively. IPv6 Commands 889 CLI Command Reference Manual