Netgear XSM4324FS CLI Manual Software Version 12.x - Page 669
The following example enables the DHCP client on a VLAN routing interface, Routing Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 669 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition ICMP Redirects Displays whether ICMP Redirects may be sent (enabled or disabled). DHCP Client Identifier The client identifier is displayed in the output of the command only if DHCP is enabled with the client-id option on the in-band interface. See the ip address dhcp command. Command example: (NETGEAR Switch) #show ip interface 1/0/2 Routing Interface Status Down Primary IP Address 1.2.3.4/255.255.255.0 Method Manual Secondary IP Address(es 21.2.3.4/255.255.255.0 22.2.3.4/255.255.255.0 Helper IP Address 1.2.3.4 1.2.3.5 Routing Mode Disable Administrative Mode Enable Forward Net Directed Broadcasts Disable Proxy ARP Enable Local Proxy ARP Disable Active State Inactive Link Speed Data Rate Inactive MAC Address 00:10:18:82:0C:68 Encapsulation Type Ethernet IP MTU 1500 Bandwidth 100000 kbps Destination Unreachables Enabled ICMP Redirects Enabled Command example: The following example enables the DHCP client on a VLAN routing interface: (NETGEAR Switch) #show ip interface vlan 10 Routing Interface Status Up Method DHCP Routing Mode Enable Administrative Mode Enable Forward Net Directed Broadcasts.......... Disable Active State Inactive Link Speed Data Rate 10 Half MAC address 00:10:18:82:16:0E Encapsulation Type Ethernet IP MTU 1500 Bandwidth 10000 kbps Destination Unreachables Enabled Routing Commands 669 CLI Command Reference Manual