Netgear XSM4324FS CLI Manual Software Version 12.x - Page 70
Console Port Access Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Console Port Access Commands This section describes the commands you use to configure the console port. You can use a serial cable to connect a management host directly to the console port of the switch. configure This command gives you access to the Global Config mode. From the Global Config mode, you can configure a variety of system settings, including user accounts. From the Global Config mode, you can enter other command modes, including Line Config mode. Format Mode configure Privileged EXEC line This command gives you access to the Line Console mode, which allows you to configure various Telnet settings and the console port, as well as to configure console login/enable authentication. Format Mode line {console | telnet | ssh} Global Config Term console telnet ssh Definition Console terminal line. Virtual terminal for remote console access (Telnet). Virtual terminal for secured remote console access (SSH). Command example: ((NETGEAR Switch)(config)#line telnet (NETGEAR Switch)(config-telnet)# serial baudrate This command specifies the communication rate of the terminal interface. The supported rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. Default Format Mode 9600 serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200} Line Config Management Commands 70 CLI Command Reference Manual