Netgear XSM4324FS CLI Manual Software Version 12.x - Page 267
netbios-name-server, netbios-node-type, b-node
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no domain-name enable This command disables sending of the domain name of a DNS server (and, if configured, a user name) to a RADIUS server. Format Mode no domain-name enable Global Config netbios-name-server This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that are available to DHCP clients. One IP address is required, although one can specify up to eight addresses in one command line. Servers are listed in order of preference (address1 is the most preferred server, address2 is the next most preferred server, and so on). Default Format Mode none netbios-name-server address [address2...address8] DHCP Pool Config no netbios-name-server This command removes the NetBIOS name server list. Format Mode no netbios-name-server DHCP Pool Config netbios-node-type The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol (DHCP) clients.type Specifies the NetBIOS node type. Valid types are: • b-node. Broadcast • p-node. Peer-to-peer • m-node. Mixed • h-node. Hybrid (recommended) Default Format Mode none netbios-node-type type DHCP Pool Config Utility Commands 267 CLI Command Reference Manual