Netgear XSM4324FS CLI Manual Software Version 12.x - Page 415
keepalive action, errdisable recovery cause keep-alive, no keepalive Interface Config
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 415 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no keepalive (Interface Config) This command disables loop protection on an interface. Format Mode no keepalive Interface Config keepalive action This command configures the action that must follow when a loop is detected on a port. Default Format Mode Disable keepalive receive-action {log | disable | both} Interface Config Parameter log disable both Description The message is logged to a buffer log but the interface is not brought down. The interface is brought down but the message is not logged. The interface is brought down and the message is logged. no keepalive action This command returns the command to the default action of disabling an interface when a loop is detected. Format Mode no keepalive receive-action Interface Config errdisable recovery cause keep-alive This command enables the autorecovery of interfaces on which a loop was detected. Format Mode errdisable recovery cause keep-alive Global Config no errdisable recovery cause keep-alive This command disables the autorecovery of interfaces on which a loop was detected. Format Mode no errdisable recovery cause keep-alive Global Config Switching Commands 415 CLI Command Reference Manual