Netgear XSM4324FS CLI Manual Software Version 12.x - Page 703
ip vrrp priority, ip vrrp timers advertise
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 703 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ip vrrp preempt This command sets the default preemption mode value for the virtual router configured on a specified interface or range of interfaces. The parameter vrid is the virtual router ID which has an integer value ranges from 1 to 255. Format Mode no ip vrrp vrid preempt Interface Config ip vrrp priority This command sets the priority of a router within a VRRP group. It can be used to configure an interface or a range of interfaces. Higher values equal higher priority. The range is from 1 to 254. The parameter vrid is the virtual router ID which has an integer value ranges from 1 to 255. The router with the highest priority is elected master. If a router is configured with the address used as the address of the virtual router, the router is called the address owner. The priority of the address owner is always 255 so that the address owner is always master. If the master has a priority less than 255 (it is not the address owner) and you configure the priority of another router in the group higher than the master's priority, the router will take over as master only if preempt mode is enabled. Default Format Mode 100 unless the router is the address owner, in which case its priority is automatically set to 255. ip vrrp vrid priority priority Interface Config no ip vrrp priority This command sets the default priority value for the virtual router configured on a specified interface or range of interfaces. The parameter vrid is the virtual router ID which has an integer value ranges from 1 to 255. Format Mode no ip vrrp vrid priority Interface Config ip vrrp timers advertise This command sets the frequency, from 1-255 seconds, that an interface or range of interfaces on the specified virtual router sends a virtual router advertisement. The parameter vrid is the virtual router ID which has an integer value ranges from 1 to 255. Default Format Mode 1 ip vrrp vrid timers advertise seconds Interface Config Routing Commands 703 CLI Command Reference Manual