Netgear XSM4324FS CLI Manual Software Version 12.x - Page 676
show ip route hw-failure, show ip route kernel
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 676 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches ECMP Group 3 with 4 next hops (used by 1 route) 172.20.31.100 on interface 2/31 172.20.32.100 on interface 2/32 172.20.33.100 on interface 2/33 172.20.34.100 on interface 2/34 show ip route hw-failure This command displays the routes that were not added to the hardware because of hash errors or because the table was full. Format Mode show ip route hw-failure Privileged Exec Command example: (NETGEAR Switch) #show ip route hw-failure Route Codes: R - RIP Derived, O - OSPF Derived, C - Connected, S - Static B - BGP Derived, IA - OSPF Inter Area E1 - OSPF External Type 1, E2 - OSPF External Type 2 N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA External Type 2 S U - Unnumbered Peer, L - Leaked Route, K - Kernel P - Net Prototype P 66.6.6.0/24 [1/1] via 9.0.0.2, 01d:22h:15m, 0/1 hw-failure P 66.6.7.0/24 [1/1] via 9.0.0.2, 01d:22h:15m, 0/1 hw-failure P 66.6.8.0/24 [1/1] via 9.0.0.2, 01d:22h:15m, 0/1 hw-failure P 66.6.9.0/24 [1/1] via 9.0.0.2, 01d:22h:15m, 0/1 hw-failure show ip route kernel A kernel route is a special route that can be configured into the Linux kernel, for example, through the Linux shell. The command output marks such a route with a K to denote that the route is installed in the kernel. Format Mode show ip route kernel Privileged Exec Command example: (NETGEAR Switch) #show ip route kernel Route Codes: C - Connected, S - Static R - RIP Derived O - OSPF Derived, IA - OSPF Inter Area E1 - OSPF External Type 1, E2 - OSPF External Type 2 N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA External Type 2 K - Kernel, P - Net Prototype Routing Commands 676 CLI Command Reference Manual