Netgear XSM4324FS CLI Manual Software Version 12.x - Page 476

M4300 Intelligent Edge Series Fully Managed Stackable Switches show dot1x clients This command displays 802.1X client information. This command also displays information about the number of clients that are authenticated using Monitor mode and using 802.1X. Format Mode show dot1x clients {unit/slot/port | all} Privileged EXEC Term Clients Authenticated using Monitor Mode Clients Authenticated using Dot1x Logical Interface Interface User Name Supplicant MAC Address Session Time Filter ID VLAN ID VLAN Assigned Session Timeout Session Termination Action Definition Indicates the number of the Dot1x clients authenticated using Monitor mode. Indicates the number of Dot1x clients authenticated using 802.1x authentication process. The logical port number associated with a client. The physical port to which the supplicant is associated. The user name used by the client to authenticate to the server. The supplicant device MAC address. The time since the supplicant is logged on. Identifies the Filter ID returned by the RADIUS server when the client was authenticated. This is a configured DiffServ policy name on the switch. The VLAN assigned to the port. The reason the VLAN identified in the VLAN ID field has been assigned to the port. Possible values are RADIUS, Unauthenticated VLAN, Monitor Mode, or Default. When the VLAN Assigned reason is Default, it means that the VLAN was assigned to the port because the P-VID of the port was that VLAN ID. This value indicates the time for which the given session is valid. The time period in seconds is returned by the RADIUS server on authentication of the port. This value is valid for the port only when the port-control mode is not MAC-based. This value indicates the action to be taken once the session timeout expires. Possible values are Default and Radius-Request. If the value is Default, the session is terminated and client details are cleared. If the value is Radius-Request, then a reauthentication of the client is performed. show dot1x users This command displays 802.1X port security user information for locally configured users. Format Mode show dot1x users unit/slot/port Privileged EXEC Switching Commands 476 CLI Command Reference Manual