Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1099
show poe port info
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1099 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show poe port configuration all Admin Power Power Limit High Power Detection Intf Mode Priority Limit Type Mode Type (W) 0/1 Enable Low 15.400 User Defined Disable Auto 0/2 Enable Low 15.400 User Defined Disable Auto Command example: (NETGEAR Switch) #show poe port configuration 0/2 Admin Power Power Limit High Power Detection Intf Mode Priority Limit Type Mode Type (W) 0/2 Enable Low 15.400 User Defined Disable Auto show poe port info Use this command to get information about the status of the PoE ports. You can display information based on each individual port or all the ports collectively. The command displays only PSE-capable ports. Format Mode show poe port info [port | all] Privileged EXEC User EXEC Term Definition Intf Interface on which PoE is configured. Class Class of the powered device according to the IEEE802.3af and IEEE802.3at definition. Class Usage Max Power (watts) • 0 Default 0.44-12.95 • 1 Optional 0.44-3.84 • 2 Optional 3.84-6.49 • 3 Optional 6.49-12.95 • 4 Optional 12.95-25.5 Power The power supplied to the powered device (in watts). Output Current The current supplied to the powered device (in mA). (mA) Power over Ethernet Commands 1099 CLI Command Reference Manual