Netgear XSM4324FS CLI Manual Software Version 12.x - Page 299
This command enables tracing of OSPF packets received and transmitted by the switch.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches destination address, control packet type, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug mldsnooping packet [receive | transmit] Privileged EXEC no debug mldsnooping packet Use this command to disable debug tracing of MLD snooping packet reception and transmission. Format Mode no debug mldsnooping packet [receive | transmit] Privileged EXEC debug ospf packet This command enables tracing of OSPF packets received and transmitted by the switch. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug ospf packet Privileged EXEC The following samples show the output of the trace message. JAN 02 11:03:31 10.50.50.1-2 OSPF[46300472]: ospf_debug.c(297) 25430 % Pkt RX Intf:2/0/48 Src Ip:192.168.50.2 DestIp:224.0.0.5 AreaId:0.0.0.0 Type:HELLO NetMask:255.255.255.0 D esigRouter:0.0.0.0 Backup:0.0.0.0 JAN 02 11:03:35 10.50.50.1-2 OSPF[46300472]: ospf_debug.c(293) 25431 % Pkt TX Intf:2/0/48 Src Ip:10.50.50.1 DestIp:192.168.50.2 AreaId:0.0.0.0 Type:DB_DSCR Mtu:1500 Options:E Flags: I/M/MS Seq:126166 JAN 02 11:03:36 10.50.50.1-2 OSPF[46300472]: ospf_debug.c(297) 25434 % Pkt RX Intf:2/0/48 Src Ip:192.168.50.2 DestIp:192.168.50.1 AreaId:0.0.0.0 Type:LS_REQ Length: 1500 JAN 02 11:03:36 10.50.50.1-2 OSPF[46300472]: ospf_debug.c(293) 25435 % Pkt TX Intf:2/0/48 Src Ip:10.50.50.1 DestIp:192.168.50.2 AreaId:0.0.0.0 Type:LS_UPD Length: 1500 Utility Commands 299 CLI Command Reference Manual