Netgear XSM4324FS CLI Manual Software Version 12.x - Page 145

M4300 Intelligent Edge Series Fully Managed Stackable Switches radius server key This command configures the key to be used in RADIUS client communication with the specified server. Depending on whether the auth or acct token is used, the shared secret is configured for the RADIUS authentication or RADIUS accounting server. The IP address or hostname provided must match a previously configured server. When this command is executed, the secret is prompted. Text-based configuration supports Radius server's secrets in encrypted and non-encrypted format. When you save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in encrypted format, enter the key along with the encrypted keyword. In the output of the show running-config command (for information about the command, see show running-config on page 212), these secret keys are displayed in encrypted format. You cannot show these keys in plain text format. Note: The secret must be an alphanumeric value not exceeding 16 characters. Format Mode radius server key {auth | acct} {ipaddr | dnsname} encrypted password Global Config Field ipaddr dnsname password Description The IP address of the server. The DNS name of the server. The password in encrypted format. radius server key acct 10.240.4.10 encrypted encrypt-string radius server msgauth This command enables the message authenticator attribute to be used for the specified RADIUS Authenticating server. Format Mode radius server msgauth [ipaddr | dnsname] Global Config Field ip addr dnsname Description The IP address of the server. The DNS name of the server. Management Commands 145 CLI Command Reference Manual