Netgear XSM4324FS CLI Manual Software Version 12.x - Page 670

M4300 Intelligent Edge Series Fully Managed Stackable Switches ICMP Redirects Enabled Interface Suppress Status Unsuppressed DHCP Client Identifier 0NETGEAR-0010.1882.160E-vl10 show ip interface brief This command displays summary information about IP configuration settings for all ports in the router, and indicates how each IP address was assigned. Format Modes show ip interface brief Privileged EXEC User EXEC Term Interface State IP Address IP Mask Method Definition Valid slot and port number separated by a forward slash. Routing operational state of the interface. The IP address of the routing interface in 32-bit dotted decimal format. The IP mask of the routing interface in 32-bit dotted decimal format. Indicates how each IP address was assigned. The field contains one of the following values: • DHCP. The address is leased from a DHCP server. • Manual. The address is manually configured. Command example: (alpha1) #show ip interface brief Interface ---------1/0/17 State IP Address IP Mask Method Up 192.168.75.1 255.255.255.0 DHCP show ip load-sharing This command displays the configured IP ECMP load balancing mode. Format Mode show ip load-sharing Privileged Exec Command example: (NETGEAR Switch) #show ip load-sharing ip load-sharing 6 inner Routing Commands 670 CLI Command Reference Manual