Netgear XSM4324FS CLI Manual Software Version 12.x - Page 888

M4300 Intelligent Edge Series Fully Managed Stackable Switches show ipv6 ospf area This command displays information about the area. The area-id identifies the OSPF area that is displayed. Format Modes show ipv6 ospf area area-id Privileged EXEC User EXEC Term Definition AreaID The area id of the requested OSPF area. External Routing A number representing the external routing capabilities for this area. Spf Runs The number of times that the intra-area route table has been calculated using this area's link-state database. Area Border Router The total number of area border routers reachable within this area. Count Area LSA Count Total number of link-state advertisements in this area's link-state database, excluding AS External LSAs. Area LSA Checksum A number representing the Area LSA Checksum for the specified area ID excluding the external (LS type 5) link-state advertisements. Stub Mode Represents whether the specified Area is a stub area or not. The possible values are enabled and disabled. This is a configured value. Import Summary Shows whether to import summary LSAs (enabled). LSAs OSPF Stub Metric The metric value of the stub area. This field displays only if the area is a configured as a stub area. Value The following OSPF NSSA specific information displays only if the area is configured as an NSSA. Term Definition Import Summary Shows whether to import summary LSAs into the NSSA. LSAs Redistribute into NSSA Shows whether to redistribute information into the NSSA. Default Information Shows whether to advertise a default route into the NSSA. Originate Default Metric The metric value for the default route advertised into the NSSA. Default Metric Type The metric type for the default route advertised into the NSSA. Translator Role The NSSA translator role of the ABR, which is always or candidate. IPv6 Commands 888 CLI Command Reference Manual