Netgear XSM4324FS CLI Manual Software Version 12.x - Page 593

M4300 Intelligent Edge Series Fully Managed Stackable Switches no set mld querier query_interval Use this command to set the MLD Querier Query Interval time to its default value. Format Mode no set mld querier query-interval Global Config set mld querier timer expiry Use this command to set the MLD querier timer expiration period. It is the period in seconds, from 60-300 seconds, that the switch remains in non-querier mode after it has discovered a multicast querier in the network. Default Format Mode 60 seconds set mld querier timer expiry seconds Global Config no set mld querier timer expiry Use this command to set the MLD querier timer expiration period to its default value. Format Mode no set mld querier timer expiry Global Config set mld querier election participate Use this command to enable the Snooping Querier to participate in the Querier Election process when it discovers the presence of another Querier in the VLAN. When this mode is enabled, if the Snooping Querier finds that the other Querier's source address is better (less) than the Snooping Querier's address, it stops sending periodic queries. If the Snooping Querier wins the election, then it will continue sending periodic queries. Default Format Mode disabled set mld querier election participate VLAN Config no set mld querier election participate Use this command to set the snooping querier not to participate in querier election but go into a non-querier mode as soon as it discovers the presence of another querier in the same VLAN. Format Mode no set mld querier election participate VLAN Config Switching Commands 593 CLI Command Reference Manual