Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1043
ip igmp version, ip igmp last-member-query-count
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1043 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches ip igmp version This command configures the version of IGMP for an interface or range of interfaces. The value for version is either 1, 2 or 3. Default Format Modes 3 ip igmp version version Interface Config no ip igmp version This command resets the version of IGMP to the default value. Format Modes no ip igmp version Interface Config ip igmp last-member-query-count This command sets the number of Group-Specific Queries sent by the interface or range of interfaces before the router assumes that there are no local members on the interface. The range for count is from 1 to 20. Format Modes ip igmp last-member-query-count count Interface Config no ip igmp last-member-query-count This command resets the number of Group-Specific Queries to the default value. Format Modes no ip igmp last-member-query-count Interface Config ip igmp last-member-query-interval This command configures the Maximum Response Time inserted in Group-Specific Queries which are sent in response to Leave Group messages. The range for deciseconds is 0 to 255 tenths of a second. This value can be configured on one interface or a range of interfaces Default Format Modes 10 tenths of a second (1 second) ip igmp last-member-query-interval deciseconds Interface Config IP Multicast Commands 1043 CLI Command Reference Manual