Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1014
show ip mcast, show ip mcast boundary, show ip mcast interface
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1014 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show ip mcast This command displays the system-wide multicast information. Format Modes show ip mcast Privileged EXEC User EXEC Term Definition Admin Mode The administrative status of multicast. Possible values are enabled or disabled. Protocol State The current state of the multicast protocol. Possible values are Operational or Non-Operational. Table Max Size The maximum number of entries allowed in the multicast table. Protocol The multicast protocol running on the router. Possible values are PIMDM, PIMSM, or DVMRP. Multicast The number of entries in the multicast forwarding cache. Forwarding Cache Entry Count show ip mcast boundary This command displays all the configured administrative scoped multicast boundaries. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. Format Modes show ip mcast boundary {unit/slot/port | vlan vlan-id | all} Privileged EXEC User EXEC Term Interface Group Ip Mask Definition unit/slot/port The group IP address. The group IP mask. show ip mcast interface This command displays the multicast information for the specified interface. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. IP Multicast Commands 1014 CLI Command Reference Manual