Netgear XSM4324FS CLI Manual Software Version 12.x - Page 236
security, port Mail Server Config, no mail-server
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no mail-server This command removes the specified SMTP server from the configuration. Format Mode no mail-server {ip-address | ipv6-address | hostname} Global Config security This command sets the email alerting security protocol by enabling the switch to use TLS authentication with the SMTP Server. If the TLS mode is enabled on the switch but the SMTP sever does not support TLS mode, no email is sent to the SMTP server. Default Format Mode none security {tlsv1 | none} Mail Server Config port (Mail Server Config) This command configures the TCP port to use for communication with the SMTP server. The recommended port number for TLSv1 is 465, and for no security that is, none) it is port number 25. However, any nonstandard port number in the range 1 to 65535 is also allowed. Default Format Mode 25 port number Mail Server Config username (Mail Server Config) This command configures the login ID the switch uses to authenticate with the SMTP server. Default Format Mode admin username name Mail Server Config password (Mail Server Config) This command configures the password the switch uses to authenticate with the SMTP server. Default Format Mode admin password password Mail Server Config Utility Commands 236 CLI Command Reference Manual