Netgear XSM4324FS CLI Manual Software Version 12.x - Page 884

M4300 Intelligent Edge Series Fully Managed Stackable Switches no max-metric router-lsa Use this command in OSPFv3 Router Configuration mode to disable stub router mode. The command clears either type of stub router mode (always or on-startup) and resets all LSA options. If OSPF is configured to enter global configuration mode on startup, and during normal operation you want to immediately place OSPF in stub router mode, issue the command no max-metric router-lsa on-startup. The command no max-metric router-lsa with the external-lsa, inter-area-lsas, on-startup, or summary-lsa option causes OSPF to send summary LSAs with metrics computed using normal procedures. Format Mode no max-metric router-lsa [external-lsa] [inter-area-lsas] [on-startup] [summary-lsa] OSPFv3 Router Configuration clear ipv6 ospf stub-router Use this command to force OSPF to exit stub router mode when it has automatically entered stub router mode because of a resource limitation. OSPF only exits stub router mode if it entered stub router mode because of a resource limitation or it if is in stub router mode at startup. This command does not take effect if OSPF is configured to be in stub router mode permanently. Format Mode clear ipv6 ospf stub-router Privileged EXEC OSPFv3 Show Commands show ipv6 ospf This command displays information relevant to the OSPF router. Format Mode show ipv6 ospf Privileged EXEC User EXEC Note: Some of the information below displays only if you enable OSPF and configure certain features. IPv6 Commands 884 CLI Command Reference Manual