Netgear XSM4324FS CLI Manual Software Version 12.x - Page 765

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition No Neighbor at Source Address The number of OSPF packets dropped because the sender is not an existing neighbor or the sender's IP address does not match the previously recorded IP address for that neighbor. Note: Does not apply to Hellos. Invalid OSPF Packet Type The number of OSPF packets discarded because the packet type field in the OSPF header is not a known type. Hellos Ignored The number of received Hello packets that were ignored by this router from the new neighbors after the limit has been reached for the number of neighbors on an interface or on the system as a whole. The following table lists the number of OSPF packets of each type sent and received on the interface. Packet Type Hello Database Description LS Request LS Update LS Acknowledgment Sent 6960 3 1 141 40 Received 6960 3 1 42 135 show ip ospf lsa-group This command displays the number of self-originated LSAs within each LSA group. Format Modes show ip ospf lsa-group Privileged EXEC User EXEC Field Total self-originated LSAs Average LSAs per group Pacing group limit Groups Description The number of LSAs the router is currently originating. The number of self-originated LSAs divided by the number of LSA groups. The number of LSA groups is the refresh interval (1800 seconds) divided by the pacing interval (configured with timers pacing lsa-group) plus two. The maximum number of self-originated LSAs in one LSA group. If the number of LSAs in a group exceeds this limit, OSPF redistributes LSAs throughout the refresh interval to achieve better balance. For each LSA pacing group, the output shows the range of LSA ages in the group and the number of LSAs in the group. Routing Commands 765 CLI Command Reference Manual