Netgear XSM4324FS CLI Manual Software Version 12.x - Page 75
session-timeout Line Config, telnetcon maxsessions, telnetcon timeout
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches session-timeout (Line Config) This command sets the Telnet session time-out value. The time-out value unit of time is minutes and is specified by the minutes argument in the range 1-160 minutes. Default Format Mode 5 session-timeout minutes Line Config no session-timeout This command sets the Telnet session timeout value to the default. The timeout value unit of time is minutes. Format Mode no session-timeout Line Config telnetcon maxsessions This command specifies the maximum number of Telnet connection sessions that can be established. The number argument can be a number in the range from 0-5. A value of 0 indicates that no Telnet connection can be established. Default Format Mode 5 telnetcon maxsessions number Privileged EXEC no telnetcon maxsessions This command sets the maximum number of Telnet connection sessions that can be established to the default value. Format Mode no telnetcon maxsessions Privileged EXEC telnetcon timeout This command sets the Telnet connection session time-out value. A session is active as long as the session has not been idle for the value set. The time-out value unit of time is minutes and is specified by the minutes argument in the range 1-160 minutes. Management Commands 75 CLI Command Reference Manual