Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1024
PIM Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1024 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show ip dvmrp route This command displays the multicast routing information for DVMRP. Format Modes show ip dvmrp route Privileged EXEC User EXEC Term Definition Source Address The multicast address of the source group. Source Mask The IP Mask for the source group. Upstream Neighbor The IP address of the neighbor which is the source for the packets for a specified multicast address. Interface The interface used to receive the packets sent by the sources. Metric The distance in hops to the source subnet. This field has a different meaning than the Interface Metric field. Expiry Time (secs) The expiry time in seconds, which is the time left for this route to age out. Up Time (secs) The time when a specified route was learnt, in seconds. PIM Commands This section describes the commands you use to configure Protocol Independent Multicast -Dense Mode (PIM-DM) and Protocol Independent Multicast - Sparse Mode (PIM-SM). PIM-DM and PIM-SM are multicast routing protocols that provides scalable inter-domain multicast routing across the Internet, independent of the mechanisms provided by any particular unicast routing protocol. Only one PIM mode can be operational at a time. ip pim dense This command administratively enables the PIM Dense mode across the router. Default Format Mode disabled ip pim dense Global Config Command example: (NETGEAR) (Config) #ip pim dense IP Multicast Commands 1024 CLI Command Reference Manual