Netgear XSM4324FS CLI Manual Software Version 12.x - Page 786
Captive Portal Global Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 786 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Captive Portal Global Commands The commands in this section enable you to configure the captive portal settings that affect the captive portal feature on the switch and all captive portal instances. captive-portal Use this command to enter the Captive Portal Configuration Mode. Format Mode captive-portal Global Config enable (Captive Portal Config Mode) This command globally enables the captive portal feature on the switch. Default Format Mode Disable enable Captive Portal Config no enable (Captive Portal Config Mode) The no enable command disables the captive portal functionality. Format Mode no enable Captive Portal Config http port This command configures an additional HTTP port. Valid port numbers are in the range of 0-65535, excluding port numbers 80 and 443 which are reserved. The HTTP port default is 0 which denotes no additional port and the default port (80) is used. Default Format Mode 0 http port port-number Captive Portal Config Command example: (NETGEAR Switch) (Config-CP) #http port 8080 (NETGEAR Switch) (Config-CP) #no http port Captive Portal Commands 786 CLI Command Reference Manual