Netgear XSM4324FS CLI Manual Software Version 12.x - Page 892
The following information only displays if OSPF is initialized on the interface.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 892 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition LSA Ack Interval The amount of time, in seconds, the interface waits before sending an LSA acknowledgement after receiving an LSA. Interface Transmit Delay The number of seconds the interface adds to the age of LSA packets before transmission. Authentication Type The type of authentication the interface performs on LSAs it receives. Metric Cost The priority of the path. Low costs have a higher priority than high costs. Prefix-suppression Displays whether prefix-suppression is enabled, disabled, or unconfigured on the given interface. Passive Status Shows whether the interface is passive or not. OSPF MTU-ignore Shows whether to ignore MTU mismatches in database descriptor packets sent from neighboring routers. Link LSA Suppression The configured state of Link LSA Suppression for the interface. The following information only displays if OSPF is initialized on the interface. Term OSPF Interface Type State Designated Router Backup Designated Router Number of Link Events Metric Cost Definition Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF Interface Type is broadcast. The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and backup designated router. The router ID representing the designated router. The router ID representing the backup designated router. The number of link events. The cost of the OSPF interface. show ipv6 ospf interface brief This command displays brief information for the physical interface or virtual interface tables. Format Modes show ipv6 ospf interface brief Privileged EXEC User EXEC Term Interface OSPF Admin Mode OSPF Area ID Definition unit/slot/port States whether OSPF is enabled or disabled on a router interface. The OSPF Area ID for the specified interface. IPv6 Commands 892 CLI Command Reference Manual