Netgear XSM4324FS CLI Manual Software Version 12.x - Page 314
show mbuf, show mbuf total
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches mbuf Use this command to configure memory buffer (MBUF) threshold limits and generate notifications when MBUF limits have been reached. Format Mode mbuf {falling-threshold | rising threshold | severity} Global Config Field Rising Threshold Falling Threshold Severity Description The percentage of the memory buffer resources that, when exceeded for the configured rising interval, triggers a notification. The range is 1 to 100. The default is 0 (disabled). The percentage of memory buffer resources that, when usage falls below this level for the configured interval, triggers a notification. The range is 1 to 100. The default is 0 (disabled). The severity level at which Mbuf logs messages. The range is 1 to 7. The default is 5 (L7_LOG_SEVERITY_NOTICE). show mbuf Use this command to display the memory buffer (MBUF) Utilization Monitoring parameters. Format Mode show mbuf Privileged EXEC Field Rising Threshold Falling Threshold Severity Description The percentage of the memory buffer resources that, when exceeded for the configured rising interval, triggers a notification. The range is 1 to 100. The default is 0 (disabled). The percentage of memory buffer resources that, when usage falls below this level for the configured interval, triggers a notification. The range is 1 to 100. The default is 0 (disabled). The severity level. show mbuf total Use this command to display memory buffer (MBUF) information. Format Mode show mbuf total Privileged EXEC Field Mbufs Total Mbufs Free Mbufs Rx Used Description Total number of message buffers in the system. Number of message buffers currently available. Number of message buffers currently in use. Utility Commands 314 CLI Command Reference Manual