Netgear XSM4324FS CLI Manual Software Version 12.x - Page 329

M4300 Intelligent Edge Series Fully Managed Stackable Switches Field Description Poller Data Source The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports only. Receiver Index The sFlowReceiver associated with this sFlow counter poller. Poller Interval The number of seconds between successive samples of the counters associated with this data source. show sflow receivers Use this command to display configuration information related to the sFlow receivers. Format Mode show sflow receivers [index] Privileged EXEC Parameter Receiver Index Owner String Time Out Max Datagram Size Port IP Address Address Type Datagram Version Description The sFlow Receiver associated with the sampler/poller. The identity string for receiver, the entity making use of this sFlowRcvrTable entry. The time (in seconds) remaining before the receiver is released and stops sending samples to sFlow receiver. The no timeout value of this parameter means that the sFlow receiver is configured as a non-timeout entry. The maximum number of bytes that can be sent in a single sFlow datagram. The destination Layer4 UDP port for sFlow datagrams. The sFlow receiver IP address. The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6 address, the value is 2. The sFlow protocol version to be used while sending samples to sFlow receiver. Command example: (NETGEAR Switch) #show sflow receivers 1 Receiver Index 1 Owner String tulasi Time out 0 IP Address 0.0.0.0 Address Type 1 Port 6343 Datagram Version 5 Maximum Datagram Size 1400 Utility Commands 329 CLI Command Reference Manual