Netgear XSM4324FS CLI Manual Software Version 12.x - Page 668
is a number in the range 1-4093. The loopback, is in the range 0-7., vlan-id, number
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 668 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches The vlan-id is a number in the range 1-4093. The loopback number is in the range 0-7. Format Modes show ip interface {unit/slot/port | vlan vland-id | loopback number} Privileged EXEC User EXEC Term Definition Routing Interface Determine the operational status of IPv4 routing Interface. The possible values are Up or Down. Status Primary IP Address The primary IP address and subnet masks for the interface. This value appears only if you configure it. Method Shows whether the IP address was configured manually or acquired from a DHCP server. Secondary IP Address One or more secondary IP addresses and subnet masks for the interface. This value appears only if you configure it. Helper IP Address The helper IP addresses configured by the command ip helper-address (Interface Config) on page 714. Routing Mode The administrative mode of router interface participation. The possible values are enable or disable. This value is configurable. Administrative Mode The administrative mode of the specified interface. The possible values of this field are enable or disable. This value is configurable. Forward Net Directed Broadcasts Displays whether forwarding of network-directed broadcasts is enabled or disabled. This value is configurable. Proxy ARP Displays whether Proxy ARP is enabled or disabled on the system. Local Proxy ARP Displays whether Local Proxy ARP is enabled or disabled on the interface. Active State Displays whether the interface is active or inactive. An interface is considered active if its link is up and it is in forwarding state. Link Speed Data An integer representing the physical link data rate of the specified interface. This is measured in Rate Megabits per second (Mbps). MAC Address The burned in physical address of the specified interface. The format is 6 two-digit hexadecimal numbers that are separated by colons. Encapsulation Type The encapsulation type for the specified interface. The types are: Ethernet or SNAP. IP MTU The maximum transmission unit (MTU) size of a frame, in bytes. Bandwidth Shows the bandwidth of the interface. Destination Unreachables Displays whether ICMP Destination Unreachables may be sent (enabled or disabled). Routing Commands 668 CLI Command Reference Manual