Netgear XSM4324FS CLI Manual Software Version 12.x - Page 129
snmp-server community ro, snmp-server enable traps violation
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches snmp-server community ro This command restricts access to switch information. The access mode is read-only (also called public). Format Mode snmp-server community ro name Global Config snmp-server community rw This command restricts access to switch information. The access mode is read/write (also called private). Format Mode snmp-server community rw name Global Config snmp-server enable traps violation This command enables the switch to send violation traps. The switch sends a violation trap if it receives a packet with a disallowed MAC address on a locked port. Note: For information about port security commands, see Protected Ports Commands on page 446. Default Format Mode disabled snmp-server enable traps violation Interface Config no snmp-server enable traps violation This command prevents the switch from sending violation traps. Format Mode no snmp-server enable traps violation Interface Config snmp-server enable traps This command enables the Authentication Flag. Default Format Mode enabled snmp-server enable traps Global Config Management Commands 129 CLI Command Reference Manual