Netgear XSM4324FS CLI Manual Software Version 12.x - Page 754

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Metric The metric of the routes being redistributed. If the metric is not configured, this field is blank. Metric Type Shows whether the routes are External Type 1 or External Type 2. Number of Active The number of active OSPF areas. An active OSPF area is an area with at least one interface up. Areas ABR Status Shows whether the router is an OSPF Area Border Router. ASBR Status Reflects whether the ASBR mode is enabled or disabled. Enable implies that the router is an autonomous system border router. The router automatically becomes an ASBR when it is configured to redistribute routes learnt from other protocols. The possible values for the ASBR status is enabled (if the router is configured to redistribute routes learned by other protocols) or disabled (if the router is not configured for the same). Stub Router Status One of Active, Inactive. Stub Router Reason One of Configured, Startup, Resource Limitation. Note: The row is only listed if stub router is active. Stub Router Startup Time Remaining The remaining time, in seconds, until OSPF exits stub router mode. This row is only listed if OSPF is in startup stub router mode. Stub Router Duration The time elapsed since the router last entered the stub router mode. The row is only listed if stub router is active and the router entered stub mode because of a resource limitation. The duration is displayed in DD:HH:MM:SS format. External LSDB Overflow When the number of nondefault external LSAs exceeds the configured limit, External LSDB Limit, OSPF goes into LSDB overflow state. In this state, OSPF withdraws all of its self-originated nondefault external LSAs. After the Exit Overflow Interval, OSPF leaves the overflow state, if the number of external LSAs has been reduced. External LSA Count The number of external (LS type 5) link-state advertisements in the link-state database. External LSA Checksum The sum of the LS checksums of external link-state advertisements contained in the link-state database. AS_OPAQUE LSA Shows the number of AS Opaque LSAs in the link-state database. Count AS_OPAQUE LSA Shows the sum of the LS Checksums of AS Opaque LSAs contained in the link-state database. Checksum New LSAs Originated The number of new link-state advertisements that have been originated. LSAs Received The number of link-state advertisements received determined to be new instantiations. LSA Count The total number of link state advertisements currently in the link state database. Maximum Number The maximum number of LSAs that OSPF can store. of LSAs Routing Commands 754 CLI Command Reference Manual